pressmach machine tools unmatched precision unbelievable speed
contact
products
home

Products

3D 3 Dimensional Engraving and
Copy Milling Machine, Model: MH- 36R & MH - 45R

These machines are ideally suited for 3-dimensional engraving with provision for adapting them for 2-dimensional work also. These are for die-sinkung jobs like plastic moulding dies, forging dies, coiningdies, etc.

Based on the principal of 3-dimensional pantograph, copying is achieved from master, on reduction ratios provided, MH-36R which has a lighter, more sensitive pantograph than MH-45R, is ideal for extremelyfine detail work.

The machine is built on a robust base combining rigidity with accuracy, keeping in view the easy accessibility of work piece and master.

The sturdy pantograph of MH-45R caters to general purpose engraving and die-sinking involving heavy stock sensitive enough to reproduce delicate and intricate jobs.

The machine has independent movements for the works table and master table with all controls within easy reach. A variety of special attachments are offered with the machine and almost and type od die-sinking work can be done to perfection.

3 - Dimensional Machine
MODEL MH - 36R MH - 45R
Main motor 0.50 hp
2800 rpm
0.6 / 0.75 hp
1400 / 2800 rpm
Spindle drive :
No. of spindle
speeds
Range of speeds
Spindle vertical movement
Coarsel
Fine
Cord
10
1600 - 20,000
rpm

3 mm
1mm
Cord / Belt
14
450 - 10,000
rpm

6 mm
2mm
Pantograph :
Max. Ratio
Min. Ratio

1:1.5 mm
1:10

1:1.5 mm
1:10
Work Table
Clamping area
Max. Distance-Spindle
Nose to Table Top
Longitudinal Traverse
Cross Traverse
Copyholder Table
Clamping Area
Swivel Range

210 x 360 mm

360 mm
305 mm
160 mm
320 x 450 mm
360o

210 x 360 mm

360 mm
305 mm
160 mm
320 x 450 mm
360o
Weight : ( approx ) 450 kgs 480 kgs
     

Engraving machines

2D 2 Dimensional Pantograph
Engraving Machine, Model: BR - 234S & BR - 300S

The copying is based on the principle of two-dimensional pantograph and is accomplished by the hand traversing of the tracer along the template contour. The machine is essentially a pedestal type medium - duty machine, robust in construction, yet is very sensitive in its movements to give perfect reproduction in the ratio selected.

Drive to the cutter spindle is provided by an endless round nylon cord belt from 0.50 hp, 50 Cys, 400 / 415V, 3Ph. motor with provision to select any of the four Spindle Speeds required.The cutter is fixed to the cutter spindle by a collet and can be lowered or retracted rapidly by a level on the spindle. For finer feeds, provision with 0.05mm. graduations have been made.

The work table can be moved in all the three directions and its provided with graduated collars of 0.05 graduations.

2 - Dimensional Machine
MODEL BR - 234S BR - 300S
Ratio: 1:1 to 1:50 1:1 to 1:50
Work Table :
Size
No. of 'T' slots
Longitudinal Movement
Transverse Movement
Vertical Movement

450 x 200 mm
3
250 mm
160 mm
220 mm

600 x 250mm
4
400 mm
230 mm
260 mm
Model Table :
Size
No. of 'T' slots

450 x 230 mm
5

560 x 320 mm
6
Spindle
No. of speeds
Speeds
Rapid Movement
Micrometer feed
Micrometer graduation
Maximum cutter diameter
Electric motor

4
4000, 6000, 8000, 12000 rpm
3 mm
1mm
0.05 mm
8 mm
0.50 hp, 2800 rpm 415 V Three Phase
50 cycles

4
4000, 6000, 8000, 12000 rpm
3 mm
1mm
0.05 mm
8 mm
0.50 hp, 2800 rpm 415 V Three Phase
50 cycles
Weight : ( approx ) 250 kgs 350 kgs
     

Table Top 2 Dimensional Pantograph
Engraving Machine

The copying is based on the principle of two-dimensional pantograph and is accomplished by the hand traversing of the tracer along the template contour. The machine, robust in construction, yet is very sensitive in its movements to give perfect reproduction in the ratio selected.

Drive to the cutter spindle is provided by an endless round nylon cord belt from 0.25hp, 50 Cys, 220 VAC, Single Phase motor with provision to select any of the four Spindle Speeds required. The cutter is fixed to the cutter spindle by a collet and can be lowered or retracted rapidly by a level on the spindle.

For finer feeds, provision with 0.05mm. graduations have been made. The work table can be moved in all the tree directions and is provided with graduated collars of 0.05 graduations.

2 Dimensional Table Top
Ratio: 1:1 to 1:50
Work Table :
Size
No. of 'T' slots
Longitudinal Movement
Transverse Movement
Vertical Movement

440 x 310 mm
4
250 mm
NIL
120 mm
Model Table :
Size
No. of 'T' slots

450 x 230 mm
5
Spindle
No. of speeds
Speeds
Rapid Movement
Micrometer feed
Micrometer graduation
Maximum cutter diameter
Electric motor

4
4000, 6000, 8000, 12000 rpm
3 mm
1mm
0.05 mm
8 mm
0.25 hp, 2800 rpm 220 VAC Single Phase
50 cycles
Weight : ( approx ) 125 kgs
   

kalhare